Nexxt Solutions - ACRUX - Wireless N Gigabit Router
28
should also configure the new device for WPS in
the meantime.
In order to configure the new device, we are
going to use the Lynx Wireless Adapter from
Nexxt Solutions as an example.
I. PBC configuration
If the wireless adapter supports Wi-Fi Protected
Setup and the Push Button Configuration (PBC), you
can add the device to the network by executing any
of the two following methods.
First method:
Step 1: Press the WPS button on the front panel of
the router.
Step 2: Press and hold the WPS button of the
router 2 or 3 seconds. The adapter will then
connect to the router via WPS automatically.
Second method:
Step 1: Press the WPS button on the front panel of
the router.
Step 2: In order to configure the wireless adapter,
select
Push the button on my access point
in the
configuration utility of the WPS, as shown below.
Click
Next
to continue.
Summary of Contents for Acrux3000
Page 1: ......
