Nexus NX Start Pack 2, Installation And Operation Manual

Page: 17 / 48

English Start pack 4
16
If the batter lid is open, you may see the LED. The built in LED will
flash 2 times then lit for 2s, before it is turned off. Your Nexus system
is now ready for use.
If the pairing of some reason did not work, the LED will flash a third
time. You should then release the WSI-box airing, see below!
5 Re-initialization of the wind transducer
To release the Wind transducer and re-initializing it, press and hold the INIT
button for 5s.
The wind transducer can then be re-initialised again to the same, or to any other
WSI-box as described above.
när den åter skall monteras. Se procedur enligt ovan.
6 Maintenance!
If you have been using the Wireless wind for several seasons, you may need to
change the rechargeable cells.
Use Nexus original NiMh cells.
IMPORTANT! Do not change the rechargeable cell in strong light! If needed, cover
the solar cell with your hand while changing cells!
Open the battery lid and remove the old cell from the connector, install the new
cells. Return the used Cells to waste collection!
7 Change transducer or WSI-box / Release the pairng
If the wireless transducer or the WSI box has to be exchanged, WSI-box piring has to
be released. To release the WSI-box, there are two alteratives:
A From a NX Sea Data instrument
1. Press and hold the SET button for two seconds