NextBase Ride BikeCam, Instruction Manual

Page: 7 / 68

BikeCam Bar Mount Power Cable
USB Cable
Thank you for purchasing this NEXTBASE product, in this section we will outline some of the key
features that are available with this device.
Wi-Fi Connectivity
Connect the BikeCam to your smartphone, allowing you to control the basic functions of your
BikeCam and for viewing recordings on your smartphone or tablet.
‘FinalCam’ application is required, available for free download from Google Play (Android) and the
App Store (iOS).
GPS Logger
GPS co-ordinates, date and time are recorded, the journey can then be viewed on a map using the
supplied Windows / Mac playback software.
G Sensor / File Protection
In the event of an impact the device will automatically 'protect' the recording, stopping the file from
being over-written.
Individual files can also be 'protected' when viewed within playback mode.
Waterproof (IPx6)
The BikeCam is designed to withstand heavy splashing and rainfall. However, pro-longed exposure
is not recommended.
Automatic Start / Stop Technology
The BikeCam senses power supplied to the cigarette power socket as soon as the bike’s ignition
is turned on and will start to record automatically.
When the ignition is turned off, the BikeCam will perform an automatic shutdown process.
Note:
- Not available if the hard-wire kit is used directly with the battery.
Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries.
Apple, iPhone, iTunes, Mac and iOS are trademarks of Apple Inc., registered in the U.S. and other countries.
Google, Google Maps, Google Play and Android are trademarks or registered trademarks of Google Inc.
‘FinalCam’ software is created and distributed by Yu Xiping in association with TioTech Company Ltd.,
Yu Xiping remains the copyright owner.
Manuals & Software
Disk
Quick Start
Guide
Please check the contents of your BikeCam product.
Product appearance may differ slightly to that shown above.
Hard-wire Cable
PACKAGE CONTENTS
PRODUCT FEATURES
Quick Start Guide
3. Mounting
Fit the bar mount and install the BikeCam.
A) Release the U Bolt clamp, locate mount and re-tighten thumb screws.
B) Gently open the sprung clip 90 degrees and lower the BikeCam onto
the mount, ensuring that is it engaged fully.
Pull the clip back through 90 degrees (to the end stop) making sure
the BikeCam is securely attached to the mount.
C) Release the locking ring in order to adjust the final position of the
BikeCam, tighten the locking ring to fix position.
B
A
C
1. Insert memory card
Remove the waterproof cover and insert MicroSD card, 8-32Gb Class10.
2. Connect power
Choose the preferred power cable option (hard-wired or standard) and fit to
the BikeCam.
Note:
- When using the hard-wired cable please follow the detailed instructions
within the manual, or damage to the BikeCam can result.
OR
07