NextBase Ride BikeCam, Instruction Manual

Page: 22 / 68

PHOTO MODE (CONTD.)
Photo settings menu
The Photo settings menu is accessed by pressing the MENU button whilst in Photo mode. Use the UP
and DOWN buttons to highlight setting and press the OK button to enter the options screen.
Select the required option and press OK to confirm, press MENU again to return to photo mode.
1. Image Size
Select image size, this will increase or decrease the size of the photographic image
Default Setting: 8M
2. Colour
Adjust the colour effect of the photographic image.
Default Setting: Normal
3. Capture Mode
Turn On / Off the timer function, when this feature has been turned on, the BikeCam will
take a photo the selected period of time after the OK button has been pressed.
Default Setting: Single
4. White Balance
Adjust the white balance for different light conditions.
Default Setting: Auto
5. ISO
Adjust the ISO setting, the brighter the conditions the lower the ISO required.
Default Setting: Auto
6. Exposure
Select exposure, used to adjust exposure level for different light conditions.
Default Setting: 0
7. Date Stamp
Turn Off the date & time stamp shown on photographs taken. Can also change to date only.
Default Setting: Date & Time
8. Image Quality
Increase or decrease the quality of the photographic image.
Default Setting: High
The default settings have been carefully selected to allow you to use the BikeCam without the need
to change any settings.
Note:
- Within the SETUP menu which is accessed by pressing the MENU button twice, there is a
‘Default Settings’ option to allow you to reset the BikeCam to the factory defaults, if required.
22