NextBase Ride BikeCam, Instruction Manual

Page: 13 / 68

Hard-wire power cable installation:
These instructions provide the necessary information to install the hard-wire cable properly and
safely. Before beginning the installation process, please read these instructions carefully.
The hard-wire cable has been supplied with ring terminals to allow quick and easy connection directly
to the motorbikes battery.
Planning for the 2.5m long cable is important, the cabling has sufficient length to allow the black
box (12-24Vdc to 5Vdc converter) to be placed in an area which is NOT exposed to rain directly
i.e. under the seat, under cowlings or in the headlight.
Switch off the ignition and ensure the motorbike is stable, before work commences upon it.
If in any doubt, please contact a vehicle technician prior to starting installation.
Step 1: Running the hard-wire cable from the BikeCam to the battery
1.1 Starting from the BikeCam connector route the cable towards the battery. Making
sure there is sufficient cable to connect and or adjust the BikeCam, once installation
is complete.
1.2 Tidy any excess cable using cable clips and secure the cable to a convenient
location to prevent rattles
.
Image for illustration purposes only.
INSTALLATION (CONTD.)
13