Mounting
The BikeCam is supplied with a bar mount, this is designed to allow the quick and easy installation
of the BikeCam without the need for any tools or technical knowledge.
The BikeCam also has a threaded insert (1/4" UNC type) in the base plate, this can be used to mount
the BikeCam with a variety of camera or professional RAM mounts that are readily available.
Bar Mount:
The bar mount is easy and quick to install, simply follow the instructions given below.
A) Release the U Bolt clamp, locate mount upon a suitably size bar and re-tighten thumb screws.
B) Gently open the sprung clip 90 degrees and lower the BikeCam onto the mount, ensuring
that it is engaged fully.
Push the clip back through 90 degrees (to the end stop), making sure the BikeCam is
securely attached to the mount.
C) Release the locking ring in order to adjust the final position of the BikeCam, tighten the
locking ring to fix position.
B
A
C
INSTALLATION (CONTD.)
15
Summary of Contents for Ride BikeCam
