3 - LOAD TYPE SETTING
Default: One line of single-colour LEDs.
This procedure allows you to change the type of the connected LED.
WARNING
:
- The procedure of connection with the OneSmart APP (see paragraph 6) must be repeated each time the load type is
changed.
- The wired button always controls all LED lines in synchronised mode.
3.1 SELECTABLE LED TYPES
1. ONE LINE OF SINGLE-COLOUR LEDS
- The control unit is set to manage 4 lines of single-colour LED strip lights in synchronised mode
2. TWO LINES OF SINGLE-COLOUR LEDS
- La centrale viene impostata per gestire 2 linee di strip led: OUT 1 e 2 in parallelo e OUT3 e 4 in parallelo
3. THREE LINES OF SINGLE-COLOUR LEDS
- The control unit is set to manage 3 lines of LED strip lights: OUT 1, 2 and 3 singularly or in groups
4. FOUR LINES OF SINGLE-COLOUR LEDS
- The control unit is set to manage 4 lines of LED strip lights: OUT 1, 2, 3 and 4 singularly or in groups
ATTENTION : en fonction de la configuration du type de charge, un dimensionnement différent de l’alimentateur peut être
nécessaire
8
