6.2 - LOAD STATE WHEN THE CONTROL UNIT IS SWITCHED ON
Default: Last value before the black out
This process is used to set the state of Leds when the control unit is switched on (for example when the power supply is
provided by a general switch or timer).
PROCEDURE:
STEP 2
With a paper clip make a long press of the “hidden” button.
The LED is cyclically yellow and cyane.
Release the key when the led is yellow.
STEP 3
Make a short press on button 2 of the receiver.
The led Flashes yellow and turns off.
STEP 1
set the light on the desired state.
NOTE: light state cannot be set as off.
* function deactivation
To set up the default value, set the light OFF at step 1 of the procedure
ACTION:
Long press of the “hidden” button
LED:
Turns on yellow/cyane
ACTION:
Short press of button 2
LED:
Flashes
16
