PROCEDURE
STEP 1
Press key 1 as many times as the output number on which you want to program
the transmitter
no. of presses
LED colour
Output paired with TX
1
red
OUT1
2
green
OUT2
3
blu
OUT3
4
yellow
OUT4
5
off
/
STEP 4
Make a transmission with the transmitter to be saved
(see transmitter manual, paragraph entitled “transmitter
programming”).
The LED on the receiver Flashes 3.times and turns off.
STEP 2
Press the button 2 on the receiver for a short time and count the number of Flashes emitted by the LED:
NUMBER OF
FLASHES
FUNCTION
1
Off
2
On
3
Short press: On
Long press: Dimmer Up
4
Short press: Off
Long press: Dimmer Down
5
Memo
STEP 3
Press the button for a short time during the Flash that
corresponds to the function desired to end the count.
The led stop Flashes
ACTION:
Short press of button 1
LED:
Turns on red
ACTION:
Short pressure of button 2 during the Flash
LED:
Stop Flashes
ACTION:
Short press of button 2
LED:
Count the number of Flashes
ACTION:
Make a transmission with the transmitter
LED:
Flashes 3 times
15
