6.3 - SETTING THE TIMED ON
Default: 24 hours
This procedure is used to set the time for which the Leds stays on before an automatic switch off.
All commands reset the time count to zero, excluding the following commands that will immediately turn off the light: short
press by wired push button, command OFF by radiotransmitter, comand by App or voice.
PROCEDURE
STEP 1
With a paper clip makes a long press of the “hidden” button.
The LED is cyclically yellow and cyane.
Release the key when the led is yellow.
STEP 2
Press the button 1 on the receiver for a short time and count the number of Flashes emitted by the LED:
FLASHES
NUMBER
FUNCTION
1
No timed on
2
30 seconds
3
1 minute
4
2 minutes
5
5 minutes
6
15 minutes
7
30 minutes
8
1 hour
9
2 hours
10
3 hours
11
8 hours
12
12 hours
13
18 hours
STEP 3
Press the button for a short time during the Flash that
corresponds to the function desired to end the count.
The led turns off
ACTION:
Long press of the “hidden” button
LED:
Turns on yellow/cyane
ACTION:
Short press of button 1
LED:
Count the number of Flashes
ACTION:
Short press of button 1 during the Flashes
LED:
Turns off
17
