22
23
Video Instruction: bit.ly/nlrbuild
32:
Bolt through bracket in to large shifter arm using T-Nuts previously installed in step 30b
33:
Install 2 x T-Nuts into the bottom channel of the medium shifter support arm then bolt through the shifter mounting
corner bracket into the T-Nuts
PARTS
2 X M8 16mm bolt
2 X M8 washer
PARTS
2 X M8 regular t-nut
2 X M8 16mm bolt
2 X M8 washer
31:
Slide the large shifter arm and shifter corner mounting bracket to align with the Medium shifter support arm as shown
PARTS
NIL
34a:
These instructions help with step 34b: (1) Align T-Nut with channel (2) Place T-Nut sideways into the channel (3) Push
T-Nut into the channel (4) Align within channel by pushing on one edge (5) Push flush (for further details see page 8)
PARTS
NIL
(1)
(1)
(2)
(3)
(4)
(2)
(3)
(4)
34b:
Using step 34a install 2 x T-Nut into the top inside channel of each base (red dots show T-nut placement)
PARTS
4 X M8 regular t-nut
Note:
2 x T-Nuts on top inside
channel of the base frame
Repeat
on other
side
