Nexo PS Series, User Manual

Page: 40 / 82

Page 40/82 PS S
ERIES HARDWARE SETUP PROCEDURE
7.4.2 PS on speaker stand or on RS15 horizontally
Required items

1 x Speaker stand diameter 35mm (K&M 213 or equivalent);

Or NEXO PS pole stand (STDPS) for mounting on top of SubBass;
IMPORTANT (SPEAKER STAND)
- Speaker stand must be rated for PS cabinet weight;
- Speaker stand must always be installed on a horizontal surface;
- Stand height and footprint must be defined to prevent assembly from collapsing;
- Ensure that audience is not allowed within a safety area which radius is equal or higher
than assembly height.
Procedure

Lift PS on speaker stand or on RS15 with STDPS pole stand;

Ensure that all screws are properly tight;

Test steadiness of the assembly by pushing in all directions