NEXIQ Technologies Brake-Link, Manual

Page: 18 / 112

12 Brake-Link™ Meritor WABCO ABS Application
Chapter 1
• Getting Started
J1939
is not currently implemented.
PLC
Press to select the PLC/ENHANCED MODE hardware/communica-
tion protocol.
MODE, AXLE & SIDE Buttons
The Meritor WABCO ABS Application does not utilize these buttons.
COMPONENT Buttons
Use the
COMPONENT
buttons to select the component that you wish to test. The
available buttons are:
TRACTION & MODULATOR
The Meritor WABCO ABS Application does not utilize these buttons
SENSOR
In the Meritor WABCO ABS Application, presents the data list which
contains wheel speeds (see pg. 53).
ECU
In the Meritor WABCO ABS Application, displays ECU Information
(see pg. 27).
Other Buttons
Use the following buttons, or “hot keys” to select other Brake-Link™ options (avail-
able in Button Navigation only):
CURRENT FAULTS
In the Meritor WABCO ABS Application, use it to view all existing faults
(see pg. 25).
FAULT HISTORY
In the Meritor WABCO ABS Application, use it to view stored faults
(see pg. 29).
RESET
In the Meritor WABCO ABS Application, use it to clear stored faults
(see pg. 33).