88 Brake-Link™ Meritor WABCO ABS Application
Chapter
3
•
Using Meritor WABCO ABS Application (Trailer)
4
Brake-Link™ auto-detects the Meritor WABCO Trailer ABS ECU. It pre-
sents the ECU sensor/modulator configuration and indicates whether
there are existing and/or stored faults.
Press .
5
Brake-Link™ instructs you to
CONTINUE BY PRESSING BUTTONS
;
press
or .
6
Brake-Link™ displays the data list; use the
and
keys to scroll the
list. A dashed line appears at the end of the list.
NOTE:
i
All parameters, except
SERVICE
and
REVS PER MILE
, update continu-
ously to show the most recent values. These parameters display the
values at the time the data list was requested. To get the most current val-
ues, press
to exit the data list; and
to view the list again.
T R A I L E R 4 S / 3 M
E X I S T I N G F A U L T S
YES
S T O R E D F A U L T S
YES
[ E N T E R ]
T O C O N T I N U E
If you receive
CAN NOT IDENTIFY ECU
:
• the detected ECU is not an Easy-Stop™ (TCS I) or Enhanced
Easy-Stop™ (TCS II) controller.
If you selected
J1708/J1587 BUS
protocol and it displays
ECU
NOT RESPONDING
,
• the ECU or Data Bus is not working properly.
If you selected
PLC/ENHANCED MODE
protocol and it displays
ECU NOT RESPONDING
,
• the brake ECU is not equipped with Enhanced PLC Mode.
• the ECU or Data Bus is not working properly.
S E R V I C E
1400km
R E V S P E R M I L E
495
- - - - - - - - - - - - - - - - - - - - - -
P R I M A R Y
0.0v
