4
WARNING
Do not attempt to light the grill if gas odor is present. Contact customer service at 1-877-323-5263.
When lighting, keep your face and body as far away from the burner as possible.
BEFORE LIGHTING
Inspect the gas supply hoses prior to turning on the gas. If there is evidence of cuts, wear, or abrasion, it must
be replaced prior to use.
Only the pressure regulator and hose assembly supplied with the unit should be used. Never substitute
regulators for those supplied with the grill. Contact customer service for proper replacement.
Screw the regulator (type QCC1) onto the cylinder. Leak check the hose and regulator connections with a soap
and water solution before operating the grill (See “Leak Testing” instructions on page 11).
Do not turn “ON” the gas at the LP gas cylinder unless the quick connect gas hose is properly connected to the
side burner gas pipe system and all burner valves are in the “OFF” position.
USING THE SIDE BURNER
Inspect the gas supply hose prior to turning on the gas. If there is evidence of cuts, wear or abrasion, it must
be replaced prior to use. Do not use the side burner if gas odor is present.
Keep a spray bottle of soapy water near the grill and check the connections before each use.
ROTISSERIE DRIVE MOTOR
To ensure continued protection against electric shock:
Connect to properly grounded outlets only.
Keep extension cord connections dry and off the ground.
Do not expose to rain.
Do not use indoors.
CAUTION
When using the rotisserie burner, remove the
warming rack. High heat from the burner may
cause the warming rack to bend.
CAUTION
The grill head is heavy and will require two or
more people to lift and position onto grill cart.
LP GAS CYLINDER WARNING
1
. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
appliance.
2
. A liquid propane cylinder not connected for use should not be stored in the vicinity of this or any other
appliance.
3
. Do not store spare liquid propane gas cylinders under or near this appliance.
4
. Never fill the cylinder beyond 80 percent capacity.
5
. Liquid propane cylinders must be fitted with an Overfill Protection Device (OPD).
6. If the information above is not followed exactly, a fire resulting in death or serious injury could occur.
Figure 2240
CSA International
Project 2056659
5 of 25
