16
Natural Gas Conversion for Item#296473/Model# 720-0593A
NG Hose and Regulator Conversion
Tools required:
Phillips Head Screwdriver (+)
10mm wrench
1: Install the regulator hose (short hose) to the end of the regulator marked "OUT". Install the brass connector
to the other end of the regulator marked "IN". (If regulator, hose, and brass connector are pre-assembled, you
may disregard this step.
2. Turn all knobs to OFF. Turn off LP gas supply and remove the LP cylinder from the grill island. Remove the
brass adapter of the LP regulator from the 90 degree brass adapter with a wrench.
3. Install the NG regulator hose to the 90 degree brass adapter and secure using a wrench.
Main Tube Burner Conversion
Tools required:
Warning: Make sure all grill components are completely cool and gas supply is turned off and removed
from grill prior to performing the conversion.
Figure 2240
CSA International
Project 2056659
17 of 25
