Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
37
PEAK 980 User Manual
Chapter 3: BIOS Setup
Advanced
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable/Disable UEFI Network
Stack
Network Stack
Ipv4 PXE Support
Ipv4 HTTP Support
Ipv6 PXE Support
Ipv6 HTTP Support
PXE boot wait time
Media detect count
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
0
1
Network Stack Configuration
This section is used to configure the network stack settings.
Network Stack
Enables or disables UEFI network stack.
Ipv4 PXE Support
Enables or disables IPv4 PXE support. If disabled, the IPv4 boot option will
not be created.
Ipv4 HTTP Support
Enables or disables IPv4 HTTP support.
Ip6 PXE Support
Enables or disables IPv6 PXE support. If disabled, the IPv6 boot option will
not be created.
Ipv6 HTTP Support
Enables or disables IPv6 HTTP support.
PXE boot wait time
Configures the wait time to press the ESC key to abort the PXE boot.
Media detect count
Configures the number of times the media will be checked.
