Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
29
PEAK 980 User Manual
Chapter 3: BIOS Setup
Advanced
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables or disables system
wake on alarm event. When
enabled, System will wake on the
hr:min:sec
specified/Programmed by the
Tools from OS.
RC ACPI Settings
Wake System from S5 via RTC
[Disabled]
Advanced
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
When enabled, a VMM can
utilize the additional
hardware capabilities provided
by Vanderpool Technology.
CPU Configuration
Type
ID
Speed
L1 Data Cache
L1 Instruction Cache
L2 Cache
L3 Cache
L4 Cache
VMX
SMX/TXT
Intel (VMX) Virtualization
Technology
Active Processor Cores
Intel(R) Core(TM)
i3-9100TE CPU @ 2.20 GHz
0x906EA
2200 MHz
32 KB x 4
32 KB x 4
256 KB x 4
6 MB
N/A
Supported
Not Supported
[Enabled]
[All]
CPU Configuration
This section is used to configure the CPU.
Intel
®
Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional
hardware capabilities provided by Vanderpool Technology.
Active Processor Cores
Select the number of cores to enable in each processor package.
Wake System from S5
Enables or disables system wake on alarm event. When FixedTime is selected,
system will wake on the hr::min::sec specified. When DynamicTime is
selected, system will wake on the current time + Increase minute(s).
RC ACPI Settings
This section is used to configure RC ACPI settings.
