ZFR1811 Wireless Field Bus Router Installation Instructions
1
Refer to the
for the most up-to-date version of this document.
Application
A ZFR1811 Wireless Field Bus Router is used with
Field Equipment Advanced Application Controllers
(FACs), Field Equipment Controllers (FECs), Input/
Output Modules (IOMs), and Variable Air Volume
Modular Assembly (VMA) Series field controllers.
The ZFR1811 Router provides a wireless interface
between:
•
a field controller and the supervisory controller (by
means of a ZFR1810 Coordinator)
•
a field controller and associated WRZ Series
Wireless Room Sensors
Additionally, the ZFR1811 Wireless Field Bus Router
can be used as a repeater in WRZ-7860-0 One-to-One
Wireless Room Temperature Sensing System. For
more information, refer to the
WRZ Series One-to-One
Wireless Room Sensing System Technical Bulletin
(LIT-12011641)
.
Up to nine WRZ Series Sensors can be associated
with a single field controller. In multi-sensor
applications, the ZFR1811 Router passes all the
sensor data to an FAC, FEC, IOM, or VMA controller,
which can be configured to either average the sensors’
input or select the highest or lowest sensed condition
for control of the target zone.
A ZFR1811 Router is powered directly from the
connected field controller’s 15 VDC output.
The Router can also be powered by the power supply
in the Repeater Accessory Kit to serve as a
stand-alone repeater, extending the range of the
communications within the wireless mesh network.
Refer to the
ZFR1800 Series Wireless Field Bus
System Technical Bulletin (LIT-12011295)
or the
ZFR1800 Series Wireless Field Bus System Quick
Reference Guide (LIT-12011630)
for information on
commissioning and configuring a ZFR1800 Series
Wireless Field Bus System for operation.
Use the ZFR1811 Wireless Field Bus Router
only to
provide an input to equipment under normal
operating conditions. Where failure or malfunction of
the ZFR1811 Router could lead to personal injury or
property damage to the controlled equipment or
other property, additional precautions must be
designed into the control system. Incorporate and
maintain other devices, such as supervisory or
alarm systems or safety or limit controls, intended to
warn of or protect against failure or malfunction of
the ZFR1811 Router.
IMPORTANT:
The ZFR1800 Series Wireless Field
Bus System is not designed or intended for use in
mission-critical or life/safety applications.
ZFR1811 Wireless Field Bus Router
Installation Instructions
MS-ZFR1811-x
Part No. 24-10325-10, Rev. L
Issued April 2016
