Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
30
PEAK 980 User Manual
Chapter 3: BIOS Setup
Advanced
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Allows more than two frequency
ranges to be supported.
CPU - Power Management Control
Intel (R) SpeedStep(tm)
Turbo Mode
C states
[Disabled]
[Disabled]
[Disabled]
Advanced
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
When Disabled ME will be put
into ME Temporarily Disabled
Mode.
ME Firmware Version
ME Firmware Mode
ME Firmware SKU
ME Firmware Status 1
ME Firmware Status 2
ME State
ME Unconfig on RTC Clear
Firmware Update Configuration
12.0.67.1579
Normal Mode
Consumer SKU
0x90000255
0x86100106
[Enabled]
[Enabled]
Intel® SpeedStepTM
Enables or disables Intel SpeedStep.
Turbo Mode
Enables or disables turbo mode.
CPU C States
Enables or disables CPU C states.
CPU Power Management Control
This section is used to view CPU status and configure CPU parameters.
PCH-FW Configuration
This section is used to configure the firmware update options.
ME State
Enables or disables ME state. When disabled, ME will be placed into ME
Temporarily Disable Mode.
ME Unconfig on RTC Clear
When disabled, ME will not be unconfigured on RTC Clear.
Firmware Update Configuration
Enters the Firmware Update Configuration submenu.
