Nexa BALENO 2016, Owner'S Manual & Service Booklet, Page: 298 / 334

7-32
INSPECTION AND MAINTENANCE
68PH0-74E
68PH00733
(3) Removal
(4) Installation
2) To remove the bulb of the front turn sig-
nal light (1) from the bulb holder, push
in the bulb and turn it counterclockwise.
To install a new bulb, push it in and turn
it clockwise.
To remove and install the bulb of the
front position light (2), simply pull out or
push in the bulb.
Front Fog Light (if equipped)
1) Start the engine. Turn the steering
wheel to the opposite side of the replac-
ing fog light to replace the bulb easily.
Then turn off the engine.
68PH00734
2) Remove the clips (1).
68PH00735
3) Open the end of the cover inside the
fender.
(1)
(2)
(3)
(4)
EXAMPLE
(1)
EXAMPLE
EXAMPLE