Nexa BALENO 2016, Owner'S Manual & Service Booklet, Page: 110 / 334

2-84
BEFORE DRIVING
68PH0-74E
Default (initialization setting)
If you select “YES” and push the indicator
selector knob (2), all settings will be reini-
tialized.
Trip Summary display
Trip Summary display comes when ignition
mode is switched to ‘OFF” position. Fol-
lowing summary is displayed.
• Driving Time : Time from ignition “ON”
condition to ignition “OFF” condition is
displayed.
• Driving Mileage : Distance covered from
ignition “OFF” condition is displayed.
Warning and Indicator Messages
The display shows warning and indicator
messages to let you know about certain
vehicle problems.
A tone may also sound to alert you.
If warning and indicator messages appear
on the display, follow the messages.
Master warning indicator light
78K049
When the display shows warning and indi-
cator messages, the master warning indi-
cator light may also blink.
NOTE:
• When the problem that causes a mes-
sage to appear is corrected, the mes-
sage will disappear.
• If a message is displayed, and other
problems requiring a message occur, the
message for each of the problems will
be alternately displayed about every 5
seconds.
• When you push and hold the indicator
selector knob (2) for about 2 seconds
while a message is displayed, the mes-
sage will disappear temporarily. If the
problem that caused the message is not
corrected, the message will appear
again after 5 seconds.