Nexa BALENO 2016, Owner'S Manual & Service Booklet, Page: 278 / 334

7-12
INSPECTION AND MAINTENANCE
68PH0-74E
(For Petrol Engine Model)
68PH00708
If the coolant level is below the “LOW”
mark, more coolant should be added.
Remove the reservoir tank cap and add
coolant until the reservoir tank level
reaches the “FULL” mark. Never fill the
reservoir tank above the “FULL” mark.
(For Diesel Engine Model)
68PH00709
If the coolant level is below the “LOW”
mark, more coolant should be added.
When the engine is cool, remove the
degassing tank cap by turning it anticlock-
wise slowly to release any pressure. And
add coolant until the degassing tank level
reaches the “FULL” mark. Never fill the
degassing tank above the “FULL” mark.
Coolant Replacement
Since special procedures are required, we
recommend you take your vehicle to your
authorised Maruti Suzuki workshop for
coolant replacement.
NOTICE
When putting the cap on the reser-
voir tank, line up the mark on the cap
and the mark on the tank. Failure to
follow this can result in coolant leak-
age.
WARNING
It is hazardous to remove the reser-
voir tank cap (degassing tank cap) for
a diesel engine when the water tem-
perature is high, because scalding
fluid and steam may be blown out
under pressure. Wait until the coolant
temperature has lowered before
removing the cap.