Nexa BALENO 2016, Owner'S Manual & Service Booklet, Page: 281 / 334

7-15
INSPECTION AND MAINTENANCE
68PH0-74E
Clutch Pedal
Cable Control Clutch (if equipped)
54G274
Clutch pedal play “d”:
10 - 15 mm (0.4 - 0.6 in.)
Measure the clutch pedal play by moving
the clutch pedal with your hand and mea-
suring the distance it moves until you feel
slight resistance. The play in the clutch
pedal should be between the specified val-
ues. If the play is more or less than the
above, or clutch dragging is felt with the
pedal fully depressed, have the clutch
inspected by your authorised Maruti
Suzuki workshop.
Fluid Control Clutch (if equipped)
68PH00713
Check the clutch pedal for smooth opera-
tion and clutch fluid level from time to time.
If clutch dragging is felt with the pedal fully
depressed, have the clutch inspected by
your authorised Maruti Suzuki workshop. If
the clutch fluid level is near the “MIN” line,
fill it up to the “MAX” line with SAE J1703
or Maruti Genuine Brake Fluid (MGBF) or
DOT3 brake fluid.
Continuously Variable
Transaxle (CVT) Fluid
Specified Fluid
Use a CVT fluid SUZUKI CVT FLUID
GREEN-2.
Fluid Level Check
You must check the fluid level with the CVT
fluid at normal operating temperature.
To check the fluid level:
1) To warm up the CVT fluid, drive the
vehicle or idle the engine until the tem-
perature gauge indicates normal oper-
ating temperature.
2) Then drive for ten more minutes.
EXAMPLE
MIN
MAX
MIN
MAX
NOTICE
Driving with too much or too little
fluid can damage the transaxle.
NOTICE
Be sure to use the specified CVT
fluid. Using CVT fluid other than
SUZUKI CVT FLUID GREEN-2 may
damage the CVT of your vehicle.