Newworld NW 602F, Users Manual And Installation Handbook

Page: 20 / 27

18
ArtNo.130-0006 - Electrical connections BI oven (60)
L
N
220V - 240V
12 3
R
L
PE
45
N
E
13A
DOUBLE POLE SWITCHED
FUSE SPUR OUTLET
FUSE ON
Fig. 9.2
Fig. 9.3
The oven can be installed under a worktop (Fig. 9.1) or at high level in a tall
kitchen unit and depending on the type of installation it is designed to fit into
a standard 560 mm or 600 mm wide oven housing.
The oven is 595mm across the trims and an unrestricted opening of 560mm
minimum depth is needed, as measured from the front of the cabinet door to
the rear of the housing.
The worktop and any associated hob should be fitted BEFORE installing this
oven.
It is recommended that if installing a built-in oven directly under the hob then
there should be a minimum air gap of 20 mm between the oven and the
bottom of the hob. Failure to maintain a suitable clearance may impair the