Newworld NW 602F, Users Manual And Installation Handbook

Page: 17 / 27

15
pushed fully back to stop?
The knobs get hot when I use the oven or the grill. Can I avoid
this?
Yes, this is caused by heat rising from the oven or the grill and heating them
up. Do not leave the oven door open. Make sure that the grill pan is pushed
right back to the ‘back stop’ when grilling. Always grill with the compartment
door closed.
If there is an installation problem and I don’t get my original
installer to come back to fix it, who pays?
You do. Service organizations will charge for their call- outs if they are
correcting work carried out by your original installer. Therefore, it is in your
own interest to keep track of this installer so that you can contact them as
required.
Power failure.
In the event of a failure in the electrical supply remember to reset the clock
to ensure that the timed oven continues to operate.
Food is cooking too slowly, too quickly, or burning.
Cooking times may differ from your previous oven. Check that you are using
the recommended
temperatures and shelf positions – see the ‘Oven Cooking Guide’ – then
adjust the settings according to your own individual tastes.
The oven is not cooking evenly.
Do not use a baking tray with dimensions larger than those specified in the
section, ‘General Oven Tips’.
If you are cooking a large item, be prepared to turn it round during cooking.
If two shelves are used, check that space has been left for the heat to
circulate. When a baking tray is put into the oven, ensure that it is placed
centrally on the shelf.
Check that the door seal is not damaged and that the door is held firmly
against the seal.
A dish of water when placed on the shelf should be the same depth all over.
(For example, if it is deeper at the back, then the back of the cooker should
be raised up or the front lowered). If the cooker is not level arrange for your
Qualified Installer to level it for you.
Oven temperature getting hotter as the cooker gets older.
If turning the temperature down using the oven control knob has not worked,
or has only worked for a short time, then you may need a new thermostat.
This should be fitted by a qualified service person.
The oven light is not working.
The bulb has probably blown. Follow the Changing the bulb procedure.
INSTALLATION
Check the appliance is electrically safe when you have finished.