Copyright Velocomp LLP 2005-2015
33
NOTE
: IN THE TOP WINDOW THE LEAST SIGNIFICANT DIGIT OF THE AVERAGE WATTS
NUMBER WILL BE SUBSCRIPTED. FOR EXAMPLE, AN AVERAGE WATTAGE OF 198W WILL
SHOW IN THE TOP WINDOW AS 19
8
4.
To end an interval, click the center button
. The prior TT interval will stop and a
new TT interval will begin immediately.
5.
During any user interval you may pause the interval by clicking the left arrow
.
To resume the interval, click the left arrow again.
6.
At any time, you may review the results of all prior TT intervals by clicking the
up arrow
. You’ll see the interval number in the top window, average watts for the interval
in the center window, and elapsed time for the interval in the bottom window. Click any
button to return to the current interval being recorded.
7. To exit the TT interval, press-hold the right arrow. The message “End Train” will
appear:
NEWTON “SETUP” SCREENS (SELECT MODELS
ONLY)
THE BEST WAY TO CHANGE THE SETTINGS OF YOUR NEWTON IS BY USING ISAAC
SOFTWARE.
However, in selected models of the Newton, you can access many settings
through “Setup”.
IMPORTANT: ONLY “LEGACY” NEWTON MODELS, AND NEWTON 5 POWERSTROKE
HAVE ACCESS TO “SETUP MODE” SCREENS.
