Copyright Velocomp LLP 2005-2015
15
To set the correct elevation, while in the Slope/Wind/Elevation screen, press-hold the
center button for a few seconds. The current elevation will be updated to the reference
elevation memorized earlier in the Set Alt step.
IMPORTANT:
Release the center button as soon as the elevation is updated. If you
hold the center button too long you will get the “set alt” screen
THE NEWTON PROFILE
The bike and rider information you enter through ISAAC with “Device/Set Up Newton...”,
along with the ANT+ wireless sensor IDs memorized during Scan, and also the results from
the optional Cal Ride, together form a “Profile”, a description of all the things that make
your Newton work properly with you and your particular bike.
Your Newton can store up to four profiles in its memory,
and ISAAC software can
store
as many profiles as you like
. Any four of the profiles stored on your ISAAC software
can be transferred from ISAAC into your Newton.
IMPORTANT
: TO LEARN HOW TO STORE A PROFILE IN ISAAC, AND HOW TO LOAD AN
ISAAC-STORED PROFILE INTO YOUR NEWTON, REFER TO THE “ISAAC SOFTWARE
INSTRUCTIONS”, AVAILABLE FROM THE “HELP/HELP DOCUMENTS…” MENU IN ISAAC.
Your Newton is shipped from the factory, set to Profile 1. So, all of the
information you gather as part of your first Newton setup is stored in profile 1.
You can create up to four different profiles and store them in your Newton’s memory. This
feature is useful if you own more than one bike, or use two or more different riding
positions on the same bike (for example, hoods and TT).
CRITICAL
: EACH TIME YOU SET UP A NEW BIKE, YOU WILL NEED TO MANUALLY CHANGE
THE ACTIVE PROFILE BEING USED IN YOUR NEWTON. SEE PAGE 15 FOR DETAILS
USING THE NEWTON WITH MULTIPLE BIKES AND
PROFILES
If you have more than one bike you’ll want to use your Newton with all of them! It’s easy:
you’ll attach a Newton mount and ANT+ speed/cadence sensor to each bike, use ISAAC to
create a unique Newton “Profile” for each bike, then perform the pairing process. If you
wish, you can improve the accuracy of your new Profile by performing a “Cal Ride”.
ANT+ sensors broadcast unique “Wireless IDs” that uniquely identify them. Each bike will
