22
5.
Use a clean, small diameter rod to check the level. When checking the
level, be sure the rod sits on the bottom of the piston and not on the
narrow ledge at the bottom of the support shaft.
6.
Reverse Steps 2 and 3 to re-assemble the isolator. Return the support
plate to the position noted in Step 2.
7.
Reinstall the isolator and apply air pressure. Make any required
adjustments to return the system to operation.
Summary of Contents for IPV
