© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
138
EXTERIOR
Source(s): Hammock User Guide
Product(s): Algoma Net Hammock w/Pad, Pillow, and Chain (Model: 4901HPSP,
Newmar Part Number: 131134)
ADJUSTMENT CONTROL
The Mirror Control switch operates the electric portion
of the mirror and adjusts the mirror up, down, back, and
forth. To select which mirror to adjust, flip the selector to
the left or right position. Move the selector to the center
position to obtain the best view and make the directional
arrows inactive. The adjustment control moves the top
half of both mirrors. The bottom half of the mirror is
convex and is adjusted manually.
HEAT
The red switch located near the mirror adjustment control
operates the mirror heat (if equipped). The ignition switch
must be on for the mirror heat switch to operate.
1. To turn the mirror heat on, turn the switch to the “ON”
position. The light will illuminate on the switch when
the mirror heat is operating.
2. To turn the mirror heat off, turn the switch to the
“OFF” position. The light on the switch will turn off
when the mirror heat is no longer operating.
Overview
Your coach may be equipped with convex
remote-controlled two-part exterior rear
view mirrors. The top portion of the mirror
is flat, providing conventional reflected
views down the sides of the RV, while the
bottom portion is convex to provide an
expanded view, helping to eliminate blind
spots. These mirrors may also contain
heating elements to defog, defrost, or de-
ice the mirror glass during cold weather operation.
Operation
Some mirrors can be operated via remote control. These
mirrors are adjusted by using the multi-directional
switches located on the driver’s door (optional on some
models) or console. Make sure the seat is positioned for
proper vehicle control, and then adjust the mirrors for
maximum rear visibility prior to driving.
Optional Accessories
This article provides basic operation instructions for an Algoma Net Hammock (Model: 4901HPSP).
The Patio Hammock offers a great place to relax and enjoy the sun or shade, your favorite show on the exterior
television, or a good book.
Algoma Net Hammock Operation (Model: 4901HPSP)
How To Set Up The Hammock
1. Start with inserting the pin assembly into the
sidewall receptacle or the tree mounted strap
assembly, then pull the locking pin out and slide the
frame apart until you see the first hole and replace
the locking pin.
•
(This will be the initial mounting position for your
hammock until it stretches from use. If you see the
stop sticker you have gone too far, compress till
you see the next hole and pin.)
2. Next unfold the legs in the downward position and
spread till they are fully extended.
3. Now attach one end of hammock mounting chain in
one end and unroll web to expose the opposite end
and attach mounting chain.
4. Loose parts [may] include the optional tablet/phone
mount; slide into Aire Nest.
5. Sit on the edge of hammock first near center, then
swivel legs up into comfortable position.
Objects viewed in the convex mirrors are closer than
they appear.
IMPORTANT
!
Summary of Contents for Mountain Aire 2022
Page 1: ...SM 2022...