NewMar LONDONAIRE 2022, Manual

Page: 152 / 216

© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
147
HVAC
CAUTION
!
Per the Aries Engineering (Gold Heat) Radiant Floor
Heat Installation Instructions and Owner’s Manual,
“Don’t place rubber backed area or throw rugs over
the heated area to avoid excessive heat from building
in these areas.”
Climate Control via SilverLeaf
The Climate All screen controls and displays the settings for the heating and air conditioning (HVAC) system in the
coach. From this screen, you can set the temperature for heating and cooling, as well as schedule temperature changes
by day, night, or when you are away.
Use the Climate All screen to manage the heating and
cooling for all HVAC zones in the coach. This is a global
display and control.
•
Status Bars and Icons : Display the current status
and operation of the HVAC system in the Climate All
screen or the screen for the selected zone.
•
Icons : During active cycles of heating or cooling,
icons will appear next to the Heat and Cool buttons
to indicate the active cycle:
❒ Blue Flame - Diesel burner is active for heat
❒ White Flame - Heat pump is active
❒ Fan - A/C or heat pump fan is circulating air
❒ Blue Snowflake - A/C is active
•
Heat & Cool Buttons : Pressing the Heat or Cool
button activates all the zones at one time, making
the operator unable to set heat in one zone and air
conditioning in another at the same time.
•
Auto Climate : The Auto button is used to activate
the auto climate feature of the HVAC system.
This feature allows the temperature to be set and
determines whether to use heat or A/C to maintain
the set temperature. Pressing the Auto button will
activate both the heat and cool buttons.
•
Temperature : The set points are changed by using
the up and down arrows to the desired temperature.
All zones can be set to the same temperature from
the Climate All screen or set separately in each zone
selection.
•
Schedule : To set up the schedule for day, night,
or when you are away these schedules can be
changed in the config section under “Climate
Options.”
•
Oasis Screen : The Oasis control screen can only be
accessed from the Climate All screen and allows the
user to control the Oasis Hydronic Heating system
burner and both Hydronic Heating System electric
heating elements.
❒ This screen displays the Oasis system’s
operational status and faults, if any. It also
displays the AC Input status, including “No AC
Input” or “AC Available” and the Oasis Electric
element: (1 and 2) status.
•
Day/ Night/ Return/ Away/ Hold :
❒ When Day displays a ring around it, the system is
using the daytime settings.
❒ When Night displays a ring around it, the system
is using nighttime settings.
❒ When Away displays a ring around it, the system
is using Away settings.
❒ When Away displays a ring around it and user
wants to return back to schedule, press the
Return button. The system will resume the day
or night time settings based on the time and the
configuration of the day and night schedules.
❒ When the user selects Hold, it will hold the
temperature at its setting and ignore all
scheduling until another selection is made.