© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
118
ENTERTAINMENT SYSTEMS
Remote Control
POWER
On the remote, press the Power button to power the
speaker on/off. When powered on, the speaker defaults to
the last active source.
•
When you plug the speaker into an AC (mains) outlet,
the speaker automatically powers on.
•
The first time the speaker is powered on, the speaker
defaults to the TV source.
•
If the speaker is connected to the TV using an
HDMI cable, the speaker changes to the TV source
whenever the TV is powered on.
AUTO-WAKE
You can set the speaker to power on whenever a sound
signal is received from an optical or analog cable. On the
remote press and hold the Power button I until you hear a
tone and the TV and Bluetooth lights on the speaker blink
amber 3 times to switch between auto-wake and default
power settings.
VOLUME
Volume Up: Press +. NOTE: To quickly increase the
volume, press and hold +.
Volume Down: Press -. NOTE: To quickly decrease the
volume, press and hold -.
Mute/Unmute: Press the Mute button. When audio is
muted, the light on the speaker of the current source (TV
or Bluetooth) pulses white until audio resumes. TIP: You
can also press + to resume audio.
SOURCES
You can control your TV and Bluetooth connections using
your remote. To control a source, press the TV button or
Bluetooth button) on the remote for the source you want
to control.
DIALOGUE MODE
Dialogue mode improves the clarity of dialogue and
vocals in movies, TV programs, and podcasts by adjusting
the audio balance of the system. On the remote, press the
Dialogue mode button to switch between Dialogue mode
and your default audio settings. When Dialogue mode is
enabled, the light for the current source glows green.
Note: When you enable Dialogue mode, it stays enabled
for your current source even if you switch to another
source or turn off the speaker. To disable Dialogue mode
for a source, press the Dialogue mode button again.
ADJUST THE BASS
1. On the remote, press BASS. On the speaker, the TV
and Bluetooth lights blink white 3 times.
2. Adjust the bass by doing one of the following:
•
Press Volume up (+) to increase the bass.
•
Press Volume down (-) to decrease the bass.
The TV and Bluetooth lights on the speaker glow to show
the current bass setting.
3. Press BASS. The speaker saves the current bass
setting.
RESET THE BASS
On the remote, press and hold BASS until the TV and
Bluetooth lights on the speaker blink 3 times. The bass
settings reset to original factory settings.
BLUETOOTH
1. On the remote, press the Bluetooth button. The
Bluetooth light slowly pulses blue.
2. On your mobile device, enable the Bluetooth feature.
TIP: The Bluetooth menu is usually found in the
Settings menu.
3. Select Bose TV Speaker from the device list. Once
connected, you hear a tone. The Bluetooth light
glows solid white. Bose TV Speaker appears in the
mobile device list.
Speaker Status
The LED lights located on the front of speaker show the
speaker status. The lights display the current sources
highest priority status.
Summary of Contents for LONDONAIRE 2022
Page 1: ...SM 2022...
