11
15272 Newsboy Circle
Huntington Beach,
CA 92649
Phone: 714-751-0488
Fax: 714-372-7930
E-Mail: [email protected]
PoweringTheNetwork.com
5.5.4 Default Page
After power on, Startup page will display. It will automatically switch to default page after 6 sec.
Default page
Explanation
Date and time
UPS current operation mode
UPS output voltage
UPS load percent
5.5.5 Operation Mode
The LCD automatically displays the following texts when the UPS changes status.
LCD Display
UPS status and Explanation
Normal
The normal operating mode. Input line is qualifi ed and bypasses to power the loads. At the same
time, batteries are charging.
Boost
The unit automatically transfers to Boost mode to raise the lower input line voltage when output
voltage drops to the user programmable preset limit.
Buck
The unit automatically transfers to Buck mode to reduce the higher input line voltage when
output voltage achieves the user programmable preset limit.
Battery
The unit automatically transfers to battery mode when input line power is unqualifi ed or not
present. Batteries provide power to the loads.
SelfTest
When “Self Test” is executed, the unit will enter “Battery Mode” automatically to test output
voltage and waveform. After testing, the unit will return back to “Line Mode”. Users may program
Test Timer in Setting menu to confi gure a longer time for self-test. Default testing time is 1 minute.
Standby
No output power from UPS to the loads.
5.5.6 Menu Page
After pressing ENTER button in default page, it will enter menu page.
Figure 11: Menu Page
Press SCROLL button to browse all 5 submenus below.
Menu Screen
Explanation
Status
Indicates input and output information, and other values monitored in UPS.
Event log
Indicates the active event log and the history event log which users can inquiry or clear.
Setting
Indicates the parameters of UPS can be adjusted.
Control
Indicates the operational conditions of UPS can be controlled.
Help
Indicates the Model name
