background image

Rev. 

Descrizione 
Description 

Data 
Date 

Emesso 

Issued 

Approvato 

Approved 

Lingua 
Language 

Pagina 
Page 

di Pag. 
of Pag. 

Code upgrade 

20.05.13 

E. Biancucci

F. Berti

E 1 54 

Codice / Code 

OMD10078

English 

PRODUCT MANUAL 

UNINTERRUPTIBLE POWER SUPPLIES  

B9000FXS 60kVA (3PH / 3PH)

B9000FXS 80kVA (3PH / 3PH)

B9000FXS 100kVA (3PH / 3PH)

B9000FXS 125kVA (3PH / 3PH)

B9000FXS 160kVA (3PH / 3PH)

The present  manual is an  integrant part of the products technical back-up documentation. Read the warnings
with attention as they give important instructions concerning safety.

This equipment must be used only for its appointed operation. Any other use is to be considered incorrect and
therefore dangerous. The manufacturer cannot be held responsible for damages caused by incorrect, wrong and
unreasonable use.

Borri holds itself responsible only for the equipment in its original configuration.

Any intervention altering the structure or the operating cycle of the equipment has to be carried out and
authorized directly by Borri.

Borri cannot be held responsible of the consequences deriving from the use of non original spare parts.

Borri reserves its right to carry out technical modifications on the present manual and equipment without giving
any notice. If any typing errors or mistakes are detected, they will be corrected in the new versions of the
manual.

Borri holds itself responsible for the information given in the original version of  the manual in Italian language.

Right of ownership – copying prohibited. Borri protects its rights on the drawings and catalogues by law.

Borri S.p.A. 

Via 8 Marzo, 2 – Soci 

52010 Bibbiena (AR) 

Tel. +39 0575 5351 – Fax +39 0575 561438 
Web site: www.borri.it – e-mail: [email protected] 

Summary of Contents for B9000FXS 100kVA























































Reviews: