12
Idle message:
You can specify what message (containing three lines of text) to be displayed when
nothing is scanned. You can define how long the NQuire wait before displaying the idle message after a
scan by setting the idle message timeout, as instructed in the
“
Miscellaneous Settings
”
section.
X Pos/ Y Pos: Set the x and y positions(x: 0-239; y: 0-127) of pixel.
Vert Align/ Hor Align: Set the vertical/ horizontal alignment of text. X positions will be ignored unless
horizontal alignment is set to
“
left
”
; y positions will be ignored unless vertical alignment is set to
“
top
”
.
Size: Choose between small font and large font.
Error message:
You can specify what message (containing two lines of text) to be displayed if the NQuire
does not receive a response from the remote server within a preset period of time (i.e. error message
timeout) after a scan. See the
“
Miscellaneous Settings
”
section to learn how to set the error message
timeout.
X Pos/ Y Pos: Set the x and y positions (x: 0-239; y: 0-127) of pixel.
Vert Align/ Hor Align: Align the text to a position. X positions will be ignored unless horizontal
alignment is set to
“
left
”
; y positions will be ignored unless vertical alignment is set to
“
top
”
.
Size: Choose between small font and large font.
Font Size:
Set the size of small/ large font by selecting an option from the corresponding dropdown list.
Note:
When you finish making changes to the parameters in a box, do not forget to click
“
Apply settings
”
to
save the changes.
