5
Work Procedure
1. The NQuire receives its input via:
1D/2D barcode scan engine
RFID reader.
2. The NQuire sends the input to application program which runs on a remote PC or server.
3. Application program sends information back to the terminal for display.
Mounting
The NQuire comes standard with a VESA 75 mount. The VESA 75 mount consists of a
bracket and a chassis. Please follow the instructions below to mount the NQuire onto the
VESA 75 mount.
Step 1: Select a mounting location that is convenient for operation.
Step 2: For wall mounting, install the four plastic expansion anchors in a wall and then
secure the bracket of VESA 75 mount to the wall using the four large screws. For
countertop/shelf mounting, secure the bracket of VESA 75 mount to a countertop/shelf
using the four large screws.
Step 3: Attach the chassis of VESA 75 mount to the back of the NQuire using the four small
screws.
Step 4: Follow the instructions in the following
“Wiring” section to complete the cable
connections. Then slide the NQuire into the bracket.