42
Device name:
Type a random name used for your own administration.
Authentication:
You can set a username and password to allow only authorized personnel to log in to the
NQuire configuration tool.
Programming barcode security
1. Programming mode timeout: The period of time allowed to elapse before the NQuire returns to idle
state when no programming barcode is scanned in seconds. When the timeout expires, the NQuire
automatically exits the setup mode.
2. Barcode programming security code: You can set a security code to allow only authorized personnel to
program the NQuire with barcodes. After a security code is set and enabled, you need to follow the
procedure below for barcode programming: Scan the Enter Setup barcode, then the security code then
the other programming barcodes.
Text and messages
1. Idle message timeout: The period of time before the idle message is displayed after a scan in seconds.
2. Error message timeout: The period of time the NQuire waits for a response from the remote server in
seconds. When the timeout expires, the error message will be displayed for 5 seconds.
3. Font codepage: Choose either UTF-8 (a multi-byte codepage, universal fontset which supports most
used language fonts) or one of the following single-byte codepages.
Codepage
Description
851
DOS Greek
852
“Multilingual” West European Latin-1
866
Cyrillic DOS codepage
874
Thai
1250
Central and East European Latin
1251
Cyrillic
1252
West European Latin-2
1253
Greek
1254
Turkish
1257
Baltic
4. Scan event separator: Scan event separator is added after each barcode scanned. You can set the
separator to LF, CR or CRLF.
5. Message encryption: Choose
“none” or “base64” as per your application needs.
6. Use custom NQuire identifier: NQuire identifier can be used to distinguish data acquired by one NQuire
unit from another. You can choose whether to send the user-defined NQuire identifier or not after a
scan. The default NQuire identifier is ${serial} which means the NQuire
’s serial number.
7. Currency symbol: When a single-byte codepage is selected, received ASCII value 0x80 is displayed as
the currency symbol chosen here.