166
d. Program the Timeout between Decodes (Same Barcode)
Example: Set the timeout between decodes (same barcode) to 1000ms
1. Scan the
Enter Setup
barcode.
2. Scan the
Timeout between Decodes (Same Barcode)
barcode. (See the
“Timeout between
Decodes (Same Barcode)
” section in Chapter 3)
3. Scan the numeric barcodes
“1”, “0”, “0” and “0”.
4. Scan the
Save
barcode.
5. Scan the
Exit Setup
barcode. (If you still need to program other parameter/feature, skip this step.)
e. Program the Threshold Value of Illumination Change
Example: Set the threshold value of illumination change to 4
1. Scan the
Enter Setup
barcode.
2. Scan the
Threshold Value of Illumination Change
barcode. (See the
“Sensitivity” section in
Chapter 3)
3. Scan the numeric barcode
“4”.
4. Scan the
Save
barcode.
5. Scan the
Exit Setup
barcode. (If you still need to program other parameter/feature, skip this step.)
f. Program the Timeout between Decodes
Example: Set the timeout between decodes to 500ms
1. Scan the
Enter Setup
barcode.
2. Scan the
Timeout between Decodes
barcode. (See the
“Timeout between Decodes” section in
Chapter 3)
3. Scan the numeric barcodes
“5”,“0” and “0”.
4. Scan the
Save
barcode.
5. Scan the
Exit Setup
barcode. (If you still need to program other parameter/feature, skip this step.)
Summary of Contents for NLS-HR3290
