165
Appendix 5: Parameter Programming Examples
The following examples show you how to program parameters by scanning programming barcodes.
a. Program the Decode Session Timeout
Example: Set the decode session timeout to 1500ms
1. Scan the
Enter Setup
barcode.
2. Scan the
Decode Session Timeout
barcode. (See the
“Decode Session Timeout” section in Chapter
3)
3. Scan the numeric barcodes
“1”, “5”, “0” and “0”.
4. Scan the
Save
barcode.
5. Scan the
Exit Setup
barcode. (If you still need to program other parameter/feature, skip this step.)
b. Program the Time Period from Idle to Sleep
Example: Set the time period from idle to sleep to 500ms
1. Scan the
Enter Setup
barcode.
2. Scan the
Time
Period from Idle to Sleep
barcode. (See the
“Auto Sleep” section in Chapter 3)
3. Scan the numeric barcodes
“5”, “0” and “0”.
4. Scan the
Save
barcode.
5. Scan the
Exit Setup
barcode. (If you still need to program other parameter/feature, skip this step.)
c. Program the Image Stabilization Timeout
Example: Set the image stabilization timeout to 500ms
1. Scan the
Enter Setup
barcode.
2. Scan the
Image Stabilization Timeout
barcode. (See the
“Image Stabilization Timeout” section in
Chapter 3)
3. Scan the numeric barcodes
“5”, “0” and “0”.
4. Scan the
Save
barcode.
5. Scan the
Exit Setup
barcode. (If you still need to program other parameter/feature, skip this step.)
Summary of Contents for NLS-HR3290
