Newland NLS-HR3260 Series, User Manual

Page: 33 / 155

【
Enter Setup
】
Auto Sleep
Auto Sleep allows the scanner in the Manual Mode to automatically enter the sleep or low power mode if
no operation or communication is performed for a time period (user programmable). When the scanner is
in the sleep mode, receiving trigger signal or communication from the Host can awake the scanner. The
scanner returns to full operation within 100ms.
**
【
Enable Auto Sleep
】 【
Disable Auto Sleep
】
The parameter below specifies the amount of time the scanner remains idle (no operation or
communication expires) before it is put into sleep mode. It is programmable in 1ms increments from 0ms
to 65,535ms. The default setting is 500ms.
【
Time Period from Idle to Sleep
】
Set the time period from idle to sleep to 1,500ms:
1. Scan the Enter Setup barcode.
2. Scan the Time Period from Idle to Sleep barcode.
3. Scan the numeric barcodes “1”, “5”, “0” and “0”. (See the Digit Barcodes in
Appendix )
4. Scan the Save barcode. (See the Save/Cancel Barcodes in Appendix )
5. Scan the Exit Setup barcode.
23
**
【
Exit Setup
】