Newland NLS-HR200C, User Manual

Page: 110 / 156

【
Enter Setup
】
**
【
Exit Setup
】
110
Parity Check
A check digit is optional for Standard 25 and can be added as the last digit. It is a calculated value used to
verify the accuracy of the data.
No Parity Check: The scanner transmits Standard 25 barcodes as is.
Do Not Transmit Check Digit After Parity Check: The scanner will run a parity check using the last
digit of Standard 25 barcode as check digit. Barcodes passing the check will be transmitted except the
last digit, whereas those failing it will not be transmitted.
Transmit Check Digit After Parity Check: The scanner will run a parity check using the last digit of
Standard 25 barcode as check digit. Barcodes passing the check will be transmitted, whereas those
failing it will not be transmitted.
**
【
No Parity Check
】
【
Do Not Transmit Check Digit After Parity Check
】
【
Transmit Check Digit After Parity Check
】
If the Do Not Transmit Check Digit After Parity Check option is enabled, Standard
25 barcodes with a length that is less than the configured minimum length after having
the check digit excluded will not be decoded. (For example, when the Do Not
Transmit Check Digit After Parity Check option is enabled and the minimum length
is set to 4, Standard 25 barcodes with a total length of 4 characters including the check
digit cannot be read.)