Newland NLS-HR200C, User Manual

Page: 78 / 156

【
Enter Setup
】
**
【
Exit Setup
】
78
Set Length Range for Matrix 2 of 5
The scanner can be configured to only decode Matrix 2 of 5 barcodes with lengths that fall between
(inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and
maximum lengths.
【
Set the Minimum Length (Default: 6)
】
【
Set the Maximum Length (Default: 127)
】
If minimum length is set to be greater than maximum length, the scanner only decodes
Matrix 2 of 5 barcodes with either the minimum or maximum length. If minimum length
is same as maximum length, only Matrix 2 of 5 barcodes with that length are to be
decoded.
Set the scanner to decode Matrix 2 of 5 barcodes containing between 8 and 12
characters:
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric barcode “8”. (See the “ Digit Barcodes ” section in Appendix )
4. Scan the Save barcode. (See the “ Save/Cancel Barcodes ” section in Appendix )
5. Scan the Set the Maximum Length barcode.
6. Scan the numeric barcode “1”.
7. Scan the numeric barcode “2”.
8. Scan the Save barcode.
9. Scan the Exit Setup barcode.