Newland NLS-HR200C, User Manual

Page: 104 / 156

【
Enter Setup
】
**
【
Exit Setup
】
104
Set Length Range for AIM-128
The scanner can be configured to only decode AIM-128 barcodes with lengths that fall between (inclusive)
the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum
lengths.
【
Set the Minimum Length (Default: 1)
】 【
Set the Maximum Length (Default: 127)
】
If minimum length is set to be greater than maximum length, the scanner only decodes
AIM-128 barcodes with either the minimum or maximum length. If minimum length is
same as maximum length, only AIM-128 barcodes with that length are to be decoded.
Set the scanner to decode AIM-128 barcodes containing between 8 and 12
characters:
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric barcode “8”. (See the “ Digit Barcodes ” section in Appendix )
4. Scan the Save barcode. (See the “ Save/Cancel Barcodes ” section in Appendix )
5. Scan the Set the Maximum Length barcode.
6. Scan the numeric barcode “1”.
7. Scan the numeric barcode “2”.
8. Scan the Save barcode.
9. Scan the Exit Setup barcode.