Newland NLS-HR200C, User Manual

Page: 82 / 156

【
Enter Setup
】
**
【
Exit Setup
】
82
Parity Check
A check digit is optional for Code 39 and can be added as the last digit. It is a calculated value used to
verify the accuracy of the data.
No Parity Check: The scanner transmits Code 39 barcodes as is.
Do Not Transmit Check Digit After Parity Check: The scanner will run a parity check using the last
digit of Code 39 barcode as check digit. Barcodes passing the check will be transmitted except the last
digit, whereas those failing it will not be transmitted.
Transmit Check Digit After Parity Check: The scanner will run a parity check using the last digit of
Code 39 barcode as check digit. Barcodes passing the check will be transmitted, whereas those failing it
will not be transmitted.
**
【
No Parity Check
】
【
Do Not Transmit Check Digit After Parity Check
】
【
Transmit Check Digit After Parity Check
】
If the Do Not Transmit Check Digit After Parity Check option is enabled, Code 39
barcodes with a length that is less than the configured minimum length after having
the check digit excluded will not be decoded. (For example, when the Do Not
Transmit Check Digit After Parity Check option is enabled and the minimum length
is set to 4, Code 39 barcodes with a total length of 4 characters including the check
digit cannot be read.)