Newland FR40 Koi Series, User Manual

Page: 25 / 195

【
Enter Setup
】
25
**
【
Exit Setup
】
Chapter 3 System Settings
Introduction
There are three ways to configure the
Merlin
corded scanner: barcode programming, command programming and
QuickSet programming.
Barcode Programming
The
Merlin
corded scanner can be configured through scanning programming barcodes. In the following sections, we
will explain the available options and features and provide the barcodes to program them.
This programming method is most straightforward. However, it requires manually scanning barcodes. As a result, errors
are more likely to occur.
Command Programming
The
Merlin
corded scanner can also be configured by command strings sent from the Host. In the following sections,
the commands will be provided along with programming barcodes.
Users can also design an application to send those command strings to their scanners.
QuickSet Programming
Besides the two methods mentioned above, you can conveniently perform scanner configuration through QuickSet too.
QuickSet is a Windows-based GUI program, enabling users to gain access to decoded data and captured images and to
configure scanners.
This method is quite similar to the command programming. QuickSet is a software program particularly designed for
Newland products.
Note: All settings except temporary ones are stored in non-volatile memory of the scanner and will not be lost by
removing power from the scanner.