Newland FR40 Koi Series, User Manual

Page: 139 / 195

【
Enter Setup
】
139
**
【
Exit Setup
】
Set Length Range for Maxicode
The scanner can be configured to only decode Maxicode barcodes with lengths that fall between (inclusive) the minimum
and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
【
Set the Minimum Length (Default: 1)
】
【
Set the Maximum Length (Default: 150)
】
Minimum length is not allowed to be greater than maximum length. If you only want to read Maxicode
barcodes with a specific length, set both minimum and maximum lengths to be that desired length.
Set the scanner to decode Maxicode barcodes containing between 8 and 12 bytes:
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3.
Scan the numeric barcode “8”. (See the “
Digit Barcodes
” section in
Appendix )
4. Scan the Save barcode. (
See the “
Save/Cancel Barcodes
” section in
Appendix )
5. Scan the Set the Maximum Length barcode.
6.
Scan the numeric barcode “1”.
7.
Scan the numeric barcode “2”.
8. Scan the Save barcode.
9. Scan the Exit Setup barcode.