Newland FR40 Koi Series, User Manual

Page: 82 / 195

【
Enter Setup
】
**
【
Exit Setup
】
82
Set Discrete Lengths for Interleaved 2 of 5
The scanner can be configured to only decode Interleaved 2 of 5 barcodes within a specific length range or with a couple
of discrete lengths. The length must be an even number not greater than 64 and consist of three digits (a leading zero or
zeros may need to be added to meet the length requirement).
The discrete lengths become valid only when the Enable the Discrete Lengths option is enabled.
**
【
Disable the Discrete Lengths
】
【
Set a Discrete Length
】
【
Enable the Discrete Lengths
】
【
Delete a Discrete Length
】
Set the scanner to decode Interleaved 2 of 5 barcodes containing either 12 or 24 characters:
1. Scan the Enter Setup barcode.
2. Scan the Enable the Discrete Lengths barcode.
3. Scan the Set a Discrete Length barcode.
4. Scan the numeric barcodes
“0”, “1” and “2”. (See the “
Digit Barcodes
” section in
Appendix )
5. Scan the Save barcode. (
See the “
Save/Cancel Barcodes
” section in
Appendix )
6. Scan the Set a Discrete Length barcode.
7. Scan the numeric barcodes
“0”, “2” and “4”.
8. Scan the Save barcode.
9. Scan the Exit Setup barcode.