NB-SEMS-FRT User Manual Ver.1.0
Copyright © 2020 Newbridge Technologies Int. Ltd. All rights reserved.
37
9.1-
ACCESS CONTROL OPTIONS
To set the parameters of the control lock of the terminal and related equipment. Click
Access Control Options on the Access Control interface.
Items
Descriptions
GateControl Mode
Whether to turn on the gate control mode or not, when set to ON, on this
interface will remove Door lock relay, Door sensor relay and Door sensor
type function.
Door Lock Delay (s)
The length of time that the device controls the electric lock to be unlock.
Valid value: 1~10 seconds; 0 second represents disabling the function.
Door Sensor Delay (s)
If the door is not closed and locked after opening for a certain duration
(Door Sensor Delay), an alarm will be triggered. The valid value of Door
Sensor Delay ranges from 1 to 55 seconds.
Door Sensor Type
There are three types: None, Normal Open, and Normal Closed. None
means door sensor is not in use; Normal Open means the door is always
opened when electricity is on; Normal Closed means the door is always
closed when electricity is on.
Verification Mode
The supported verification mode includes password/face, User ID only,
password, face only, and face + password.
Door available time period
To set time period for door, so that the door is available only during this.
Normal open time Period
Scheduled time period for “Normal Open” mode, so that the door is
always unlocked during this period.
Master Device
When setting up the master and slave, the status of the master can be set
to exit on enter.
Exit
: The record verified on the host is the exit record.
Enter
: The record verified on the host is the entry record.
