Newbridge NB-SEMS-FRT User Manual Download Page 15 | Manualshive

Page: 15 / 52

Newbridge NB-SEMS-FRT User Manual Download Page 15

NB-SEMS-FRT User Manual Ver.1.0

Copyright © 2020 Newbridge Technologies Int. Ltd. All rights reserved.

14

Note

：

If the selected user role is the Super Admin,

the user must pass the identity authentication
to access the main menu. The authentication

is based on the authentication method(s) that

the super administrator has registered.
Please refer to 1.7 Verification Method.

Register palm

Click Palm to enter the palm

registration page. Select the palmto

be enrolled.

Register face

Click Face to enter the face
registration page. Please face the

camera and stay still during face

registration. The registration interface

is as follows:

Register password

Click Password to enter the password registration page. Enter

a password and re-enter it. Click OK. If the two entered
passwords are different, the prompt “Password not match” will

appear.

Note

:

The password may contain one to eight digits by default.

«
...
13
14
15
16
17
...
»

Summary of Contents for NB-SEMS-FRT





















































Reviews:

No comments