24
Mill functions
2.
Enter a name for your pattern, and press
.
You return to the parameters screen.
3.
Press
.
This opens a graphical display showing the arrangement of the
holes. You can use
and
to move around the holes.
Arc contouring
This function is used to calculate the location of points along the line of the
arc. The following parameters are required for this function:
•
Arc center coordinates.
•
Arc radius.
•
Starting angle.
•
Ending angle.
•
Maximum cut.
•
Diameter of tool. (Default value comes from the Tool Setup.)
•
Machined to. (Internal, External or Center)
•
Plane (X-Y, X-Z or Y-Z).
When you have entered all the parameters:
1.
Press .
This opens the Data Entry screen.
2.
Enter a name for your pattern, and press
.
You return to the parameters screen.
3.
Press
.
This opens a graphical display showing the arrangement of the
holes. You can use
and
to move around the holes.
R-function
The R-Function is a pre-defined arc function. The parameters required
are:
•
Arc type.(1-8)
•
Arc radius.
•
Diameter of tool. (Default value comes from the Tool Setup.)
•
Maximum cut.
•
Machined to. (Internal, External or Center.)
•
Depth.
•
Plane (X-Y, X-Z or Y-Z).
Pattern
starting point
Angle
Length 2
Length 1
Step size
Radius
Start point
End point
Arc
center
